The SRU Series captures the energy your boiler is already burning and about to waste — cutting fuel costs, shrinking your carbon footprint, and recovering clean water, all from a system you retrofit onto equipment you already own.
Installs onto the boilers and appliances you already run — no need to buy new equipment.
Condensing flue gas recovery has been in commercial use worldwide for over three decades.
Sid's personal promise: satisfaction, or Sidel Systems buys the unit back.
Every boiler sends heat straight up the stack. The SRU Series intercepts it before it escapes, condensing the flue gas to pull out both heat and water — then routes both back into your operation.
Exhaust that would normally vent to atmosphere is redirected through the condenser, still carrying the bulk of its combustion heat.
As the flue gas cools inside the unit, latent heat transfers into your makeup water and water vapor condenses into clean, usable water.
Preheated water goes back to the boiler feed, cutting the fuel needed to reach temperature — while cooler, cleaner exhaust cuts emissions.
Because the SRU Series ties directly into equipment already on site, most installations pay for themselves in a handful of years and keep paying out for the working life of the boiler. No moving parts means very little to maintain.
Explore the SRU Series →From wineries to dairies to greenhouses, hundreds of clients have put wasted heat back on the balance sheet.
E&J Gallo and other high-volume producers recover process heat year-round.
Harris Ranch and Darigold cut steam costs across multi-boiler plants.
Growers Transplanting eliminated two boilers entirely with recovered heat.
Mission Linen Supply lowered both fuel and boiler chemical costs.
Pelton Reforestation has heated 20% of its growing area for free since 1986.
Georgia Gulf and AKZO Nobel run recovery units on heavy industrial boilers.
Sid and Ellen Abma started Sidel Systems in Canada helping commercial greenhouses survive brutal heat loss. That single problem — energy escaping where no one was watching — became a career, and then a family business now in its fifth decade.
"This is without a doubt, in my opinion, the most efficient and cost effective way to cut fuel costs."
— Kevin Doyle, Growers Transplanting, Inc.Recovered heat means less fuel burned to hit the same temperature — most clients see 8–18% off their fuel bill, with paybacks as short as 4–5 years.
Every 1,000,000 Btu of recovered heat keeps roughly 117 lbs of CO₂ out of the atmosphere by burning less fuel to begin with.
Condensing the flue gas yields distilled water as a byproduct — about 5 gallons recovered for every 1,000,000 Btu of natural gas combusted.
"With no moving components to wear out, there is minimal maintenance required."
DC Housing Authority"The flue gas condenser unit is an integral part of the system, providing CO2 reduction and energy savings."
Pelton Reforestation Ltd."This is without a doubt, in my opinion, the most efficient and cost effective way to cut fuel costs."
Kevin DoyleRequest a free, no-obligation info packet and Sid will walk you through the numbers for your equipment.