One retrofit that pulls three things out of your exhaust stack: energy, water, and a lower fuel bill.
The SRU Series sits in the exhaust path of a natural gas boiler or appliance, cooling the flue gas enough to condense out both its latent heat and its water vapor. Recovered heat preheats boiler feedwater; recovered water is clean enough to reuse on site. Because it has no moving parts, there's very little to maintain and very little that can fail.
Units are sized to the boiler duty they're paired with — from single-boiler commercial installs up through multi-boiler industrial plants. The SRU 400 is one configuration Sidel Systems has manufactured and shipped; every install is engineered around the client's actual stack conditions and fuel load.
Flue gas is redirected through the condenser before it reaches the stack, while it's still carrying most of its combustion heat.
As the gas cools inside the unit, heat transfers into circulating water and water vapor condenses into liquid — both captured, not lost.
Preheated feedwater goes back to the boiler and recovered water is available for reuse, while cooler exhaust means fewer emissions leaving the stack.
| Metric | Typical Result | Why It Matters |
|---|---|---|
| Fuel savings | 8–18% in most applications | Less gas burned to hit the same boiler output |
| CO₂ avoided | ~117 lbs per 1,000,000 Btu recovered | Direct reduction from lower fuel combustion |
| Water recovered | ~5 gallons per 1,000,000 Btu of gas combusted | Clean, reusable water as a byproduct, not a cost |
| Moving parts | None | Minimal maintenance over the system's working life |
| Typical payback | As little as 4–5 years | Reported by clients such as the DC Housing Authority |
| Track record | Installs running since 1986 | Pelton Reforestation's original unit is still in service |
Results vary by boiler size, fuel load, and stack conditions. Sid will size a unit and run the numbers for your specific equipment — that's what the free info packet covers.
Lower fuel spend, lower boiler chemical costs, and — in cases like Growers Transplanting — entire boilers taken offline.
Burning less fuel for the same output means a direct, measurable cut to your facility's CO₂ output.
Condensed water is clean enough to put back into your process — turning a byproduct into a resource.
Send Sid your equipment details and get a free, no-obligation info packet with real numbers.